Chiligreen Home Server: Intel Rapid Storage Technology Uživatelský manuál

Procházejte online nebo si stáhněte Uživatelský manuál pro Počítačový hardware Chiligreen Home Server: Intel Rapid Storage Technology. chiliGREEN Home Server: Intel Rapid Storage Technology User Manual Uživatelská příručka

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 36
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 0
1
Document Number: XXXXXX
Intel® Rapid Storage Technology
User Guide
August 2011
Revision
1
.
0
Zobrazit stránku 0
1 2 3 4 5 6 ... 35 36

Shrnutí obsahu

Strany 1 - User Guide

1 Document Number: XXXXXX Intel® Rapid Storage Technology User Guide August 2011 Revision 1.0

Strany 2

2.5 RAID 10 A RAID 10 array uses four hard drives to create a combination of RAID levels 0 and 1. It is a striped set whose members are each a mir

Strany 3 - Contents

2.7 RAID Migration The RAID migration feature enables a properly configured PC, known as a RAID-Ready system, to be converted into a high-performa

Strany 4

2.9 Intel® Rapid Recover Technology Intel® Rapid Recover Technology utilizes RAID 1 (mirroring) functionality to copy data from a designated

Strany 5 - 1.1 Terminology

2.10.2 Hot Plug Hot plug, also referred to as hot swap, is a feature supported by AHCI that allows SATA hard drives to be removed or inserted whi

Strany 6

3 RAID BIOS Configuration 3.1 Overview To install the Intel® Rapid Storage Technology, the system BIOS must include the SATA RAID option ROM an

Strany 7

4 Intel® Rapid Storage Technology Option ROM 4.1 Overview The Intel® Rapid Storage Technology option ROM provides the following:  Pre-operati

Strany 8

4.3 Version Identification To identify the version of the Intel® Rapid Storage Technology option ROM in the system BIOS, enter the option ROM user

Strany 9

2. Select option for Create RAID Volume and press Enter. 3. Type in a volume name and press Enter or press Enter to accept the default volume n

Strany 10

4. Select the RAID level by using the up and down arrow keys to scroll through the available values, then press Enter. 5.

Strany 11

6. Select the appropriate number of hard drives by using the up and down arrow keys to scroll through the list of available hard drives. Press th

Strany 12

2 INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH INTEL® PRODUCTS. NO LICENSE, EXPRESS OR IMPLIED, BY E

Strany 13 - 2.10.2 Hot

8. Select the volume capacity and press Enter. Note: The default value indicates the maximum volume capacity using the selected disks. If less tha

Strany 14

5 Loading Driver during Operating System Installation 5.1 Overview The chart below shows the circumstances in which the F6 installation method

Strany 15

Storage Technology can be downloaded from Download Center at http://downloadcenter.intel.com/Product_Filter.aspx?ProductID=2101 2. Extract the dri

Strany 16

3. Enter> key. Refer to the Automatic F6 Diskette Creation section above for instructions. 4. Select the RAID or AHCI control

Strany 17

6 Intel® Rapid Storage Technology Installation 6.1 Overview After installing an operating system onto a RAID volume or on a SATA hard drive w

Strany 18

6.3 Installation Steps Note: The instructions below assume that the BIOS has been configured correctly and the RAID driver has been installed us

Strany 19

4. Review the License Agreement and click Yes to accept the license agreement terms. 5. Review the Readme File Information

Strany 20

6. Click Finish to complete the installation and restart the system. 6.4 Confirming Software Installation Refer to t

Strany 21

If installation was done using F6 or an unattended installation method, you can confirm that the Intel® Rapid Storage Technology was lo

Strany 22

7 RAID-Ready Setup 7.1 Overview A RAID-Ready system is a system configuration that allows a user to perform a RAID migration at a later date. F

Strany 23

3 Contents 1 Introduction ...

Strany 24 - Installation

8 Converting RAID-Ready to Full RAID 8.1 Overview This section explains how to convert (or migrate) from a RAID-Ready system to a fully-functio

Strany 25

4. On the Select Volume Type screen, select Real-time data protection (RAID 1) and then click Next. 5. On the Configure Vol

Strany 26

6. Review the warning screen and then click Create Volume. 7. Review the confirmation screen and then click OK.

Strany 27

8. After the volume has been created, click OK on the completion screen. 9. Review the Status screen, now showing the RAID array just cr

Strany 28

9 Verify and Repair 9.1 Overview Verify and Repair checks a volume for inconsistent or bad data. It may also fix any data problems or parity errors

Strany 29

Appendix A: Error Messages A.1 Incompatible Hardware Issue: The following error message appears during installation: Incompatible hardware. Th

Strany 30 - RAID-Ready to Full RAID

A.5 Source Hard Drive is Dynamic Disk Issue: When attempting to migrate from a RAID-Ready system to a full-RAID system, an error message is recei

Strany 31

4 6 Intel® Rapid Storage Technology Installation ... 24 6.1

Strany 32

5 1 Introduction The purpose of this document is to enable a user to properly set up and configure a system using Intel® Rapid Storage Technology

Strany 33

6 Term Description Migration The process of converting a system's data storage configuration from a non-RAID configuration (pass-thru) to a

Strany 34 - 9 Verify and Repair

7 Term Description RAID Array A logical grouping of physical hard drives. RAID Level Migration The process of converting a system's data stor

Strany 35 - A: Error Messages

2 Intel® Rapid Storage Technology Features 2.1 Feature Overview The Intel® Rapid Storage Technology software package provides high-performance

Strany 36

2.3 RAID 1 (Mirroring) A RAID 1 array contains two hard drives where the data between the two is mirrored in real time to provide good data reliab

Komentáře k této Příručce

Žádné komentáře